X-Git-Url: http://www.aleph1.co.uk/gitweb/?p=yaffs-website;a=blobdiff_plain;f=vendor%2Fdrush%2Fdrush%2Ftests%2Fresources%2Fcodebase%2Fweb%2Fsites%2Fdefault%2Fdefault.settings.php;fp=vendor%2Fdrush%2Fdrush%2Ftests%2Fresources%2Fcodebase%2Fweb%2Fsites%2Fdefault%2Fdefault.settings.php;h=4445d23f3ff5e4fff6f091d05c3855e6afbf665a;hp=0000000000000000000000000000000000000000;hb=af6d1fb995500ae68849458ee10d66abbdcfb252;hpb=680c79a86e3ed402f263faeac92e89fb6d9edcc0 diff --git a/vendor/drush/drush/tests/resources/codebase/web/sites/default/default.settings.php b/vendor/drush/drush/tests/resources/codebase/web/sites/default/default.settings.php new file mode 100644 index 000000000..4445d23f3 --- /dev/null +++ b/vendor/drush/drush/tests/resources/codebase/web/sites/default/default.settings.php @@ -0,0 +1,754 @@ + 'databasename', + * 'username' => 'sqlusername', + * 'password' => 'sqlpassword', + * 'host' => 'localhost', + * 'port' => '3306', + * 'driver' => 'mysql', + * 'prefix' => '', + * 'collation' => 'utf8mb4_general_ci', + * ); + * @endcode + */ +$databases = []; + +/** + * Customizing database settings. + * + * Many of the values of the $databases array can be customized for your + * particular database system. Refer to the sample in the section above as a + * starting point. + * + * The "driver" property indicates what Drupal database driver the + * connection should use. This is usually the same as the name of the + * database type, such as mysql or sqlite, but not always. The other + * properties will vary depending on the driver. For SQLite, you must + * specify a database file name in a directory that is writable by the + * webserver. For most other drivers, you must specify a + * username, password, host, and database name. + * + * Transaction support is enabled by default for all drivers that support it, + * including MySQL. To explicitly disable it, set the 'transactions' key to + * FALSE. + * Note that some configurations of MySQL, such as the MyISAM engine, don't + * support it and will proceed silently even if enabled. If you experience + * transaction related crashes with such configuration, set the 'transactions' + * key to FALSE. + * + * For each database, you may optionally specify multiple "target" databases. + * A target database allows Drupal to try to send certain queries to a + * different database if it can but fall back to the default connection if not. + * That is useful for primary/replica replication, as Drupal may try to connect + * to a replica server when appropriate and if one is not available will simply + * fall back to the single primary server (The terms primary/replica are + * traditionally referred to as master/slave in database server documentation). + * + * The general format for the $databases array is as follows: + * @code + * $databases['default']['default'] = $info_array; + * $databases['default']['replica'][] = $info_array; + * $databases['default']['replica'][] = $info_array; + * $databases['extra']['default'] = $info_array; + * @endcode + * + * In the above example, $info_array is an array of settings described above. + * The first line sets a "default" database that has one primary database + * (the second level default). The second and third lines create an array + * of potential replica databases. Drupal will select one at random for a given + * request as needed. The fourth line creates a new database with a name of + * "extra". + * + * You can optionally set prefixes for some or all database table names + * by using the 'prefix' setting. If a prefix is specified, the table + * name will be prepended with its value. Be sure to use valid database + * characters only, usually alphanumeric and underscore. If no prefixes + * are desired, leave it as an empty string ''. + * + * To have all database names prefixed, set 'prefix' as a string: + * @code + * 'prefix' => 'main_', + * @endcode + * To provide prefixes for specific tables, set 'prefix' as an array. + * The array's keys are the table names and the values are the prefixes. + * The 'default' element is mandatory and holds the prefix for any tables + * not specified elsewhere in the array. Example: + * @code + * 'prefix' => array( + * 'default' => 'main_', + * 'users' => 'shared_', + * 'sessions' => 'shared_', + * 'role' => 'shared_', + * 'authmap' => 'shared_', + * ), + * @endcode + * You can also use a reference to a schema/database as a prefix. This may be + * useful if your Drupal installation exists in a schema that is not the default + * or you want to access several databases from the same code base at the same + * time. + * Example: + * @code + * 'prefix' => array( + * 'default' => 'main.', + * 'users' => 'shared.', + * 'sessions' => 'shared.', + * 'role' => 'shared.', + * 'authmap' => 'shared.', + * ); + * @endcode + * NOTE: MySQL and SQLite's definition of a schema is a database. + * + * Advanced users can add or override initial commands to execute when + * connecting to the database server, as well as PDO connection settings. For + * example, to enable MySQL SELECT queries to exceed the max_join_size system + * variable, and to reduce the database connection timeout to 5 seconds: + * @code + * $databases['default']['default'] = array( + * 'init_commands' => array( + * 'big_selects' => 'SET SQL_BIG_SELECTS=1', + * ), + * 'pdo' => array( + * PDO::ATTR_TIMEOUT => 5, + * ), + * ); + * @endcode + * + * WARNING: The above defaults are designed for database portability. Changing + * them may cause unexpected behavior, including potential data loss. See + * https://www.drupal.org/developing/api/database/configuration for more + * information on these defaults and the potential issues. + * + * More details can be found in the constructor methods for each driver: + * - \Drupal\Core\Database\Driver\mysql\Connection::__construct() + * - \Drupal\Core\Database\Driver\pgsql\Connection::__construct() + * - \Drupal\Core\Database\Driver\sqlite\Connection::__construct() + * + * Sample Database configuration format for PostgreSQL (pgsql): + * @code + * $databases['default']['default'] = array( + * 'driver' => 'pgsql', + * 'database' => 'databasename', + * 'username' => 'sqlusername', + * 'password' => 'sqlpassword', + * 'host' => 'localhost', + * 'prefix' => '', + * ); + * @endcode + * + * Sample Database configuration format for SQLite (sqlite): + * @code + * $databases['default']['default'] = array( + * 'driver' => 'sqlite', + * 'database' => '/path/to/databasefilename', + * ); + * @endcode + */ + +/** + * Location of the site configuration files. + * + * The $config_directories array specifies the location of file system + * directories used for configuration data. On install, the "sync" directory is + * created. This is used for configuration imports. The "active" directory is + * not created by default since the default storage for active configuration is + * the database rather than the file system. (This can be changed. See "Active + * configuration settings" below). + * + * The default location for the "sync" directory is inside a randomly-named + * directory in the public files path. The setting below allows you to override + * the "sync" location. + * + * If you use files for the "active" configuration, you can tell the + * Configuration system where this directory is located by adding an entry with + * array key CONFIG_ACTIVE_DIRECTORY. + * + * Example: + * @code + * $config_directories = array( + * CONFIG_SYNC_DIRECTORY => '/directory/outside/webroot', + * ); + * @endcode + */ +$config_directories = []; + +/** + * Settings: + * + * $settings contains environment-specific configuration, such as the files + * directory and reverse proxy address, and temporary configuration, such as + * security overrides. + * + * @see \Drupal\Core\Site\Settings::get() + */ + +/** + * The active installation profile. + * + * Changing this after installation is not recommended as it changes which + * directories are scanned during extension discovery. If this is set prior to + * installation this value will be rewritten according to the profile selected + * by the user. + * + * @see install_select_profile() + */ +# $settings['install_profile'] = ''; + +/** + * Salt for one-time login links, cancel links, form tokens, etc. + * + * This variable will be set to a random value by the installer. All one-time + * login links will be invalidated if the value is changed. Note that if your + * site is deployed on a cluster of web servers, you must ensure that this + * variable has the same value on each server. + * + * For enhanced security, you may set this variable to the contents of a file + * outside your document root; you should also ensure that this file is not + * stored with backups of your database. + * + * Example: + * @code + * $settings['hash_salt'] = file_get_contents('/home/example/salt.txt'); + * @endcode + */ +$settings['hash_salt'] = ''; + +/** + * Deployment identifier. + * + * Drupal's dependency injection container will be automatically invalidated and + * rebuilt when the Drupal core version changes. When updating contributed or + * custom code that changes the container, changing this identifier will also + * allow the container to be invalidated as soon as code is deployed. + */ +# $settings['deployment_identifier'] = \Drupal::VERSION; + +/** + * Access control for update.php script. + * + * If you are updating your Drupal installation using the update.php script but + * are not logged in using either an account with the "Administer software + * updates" permission or the site maintenance account (the account that was + * created during installation), you will need to modify the access check + * statement below. Change the FALSE to a TRUE to disable the access check. + * After finishing the upgrade, be sure to open this file again and change the + * TRUE back to a FALSE! + */ +$settings['update_free_access'] = false; + +/** + * External access proxy settings: + * + * If your site must access the Internet via a web proxy then you can enter the + * proxy settings here. Set the full URL of the proxy, including the port, in + * variables: + * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP + * requests. + * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS + * requests. + * You can pass in the user name and password for basic authentication in the + * URLs in these settings. + * + * You can also define an array of host names that can be accessed directly, + * bypassing the proxy, in $settings['http_client_config']['proxy']['no']. + */ +# $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080'; +# $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080'; +# $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost']; + +/** + * Reverse Proxy Configuration: + * + * Reverse proxy servers are often used to enhance the performance + * of heavily visited sites and may also provide other site caching, + * security, or encryption benefits. In an environment where Drupal + * is behind a reverse proxy, the real IP address of the client should + * be determined such that the correct client IP address is available + * to Drupal's logging, statistics, and access management systems. In + * the most simple scenario, the proxy server will add an + * X-Forwarded-For header to the request that contains the client IP + * address. However, HTTP headers are vulnerable to spoofing, where a + * malicious client could bypass restrictions by setting the + * X-Forwarded-For header directly. Therefore, Drupal's proxy + * configuration requires the IP addresses of all remote proxies to be + * specified in $settings['reverse_proxy_addresses'] to work correctly. + * + * Enable this setting to get Drupal to determine the client IP from + * the X-Forwarded-For header (or $settings['reverse_proxy_header'] if set). + * If you are unsure about this setting, do not have a reverse proxy, + * or Drupal operates in a shared hosting environment, this setting + * should remain commented out. + * + * In order for this setting to be used you must specify every possible + * reverse proxy IP address in $settings['reverse_proxy_addresses']. + * If a complete list of reverse proxies is not available in your + * environment (for example, if you use a CDN) you may set the + * $_SERVER['REMOTE_ADDR'] variable directly in settings.php. + * Be aware, however, that it is likely that this would allow IP + * address spoofing unless more advanced precautions are taken. + */ +# $settings['reverse_proxy'] = TRUE; + +/** + * Specify every reverse proxy IP address in your environment. + * This setting is required if $settings['reverse_proxy'] is TRUE. + */ +# $settings['reverse_proxy_addresses'] = array('a.b.c.d', ...); + +/** + * Set this value if your proxy server sends the client IP in a header + * other than X-Forwarded-For. + */ +# $settings['reverse_proxy_header'] = 'X_CLUSTER_CLIENT_IP'; + +/** + * Set this value if your proxy server sends the client protocol in a header + * other than X-Forwarded-Proto. + */ +# $settings['reverse_proxy_proto_header'] = 'X_FORWARDED_PROTO'; + +/** + * Set this value if your proxy server sends the client protocol in a header + * other than X-Forwarded-Host. + */ +# $settings['reverse_proxy_host_header'] = 'X_FORWARDED_HOST'; + +/** + * Set this value if your proxy server sends the client protocol in a header + * other than X-Forwarded-Port. + */ +# $settings['reverse_proxy_port_header'] = 'X_FORWARDED_PORT'; + +/** + * Set this value if your proxy server sends the client protocol in a header + * other than Forwarded. + */ +# $settings['reverse_proxy_forwarded_header'] = 'FORWARDED'; + +/** + * Page caching: + * + * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page + * views. This tells a HTTP proxy that it may return a page from its local + * cache without contacting the web server, if the user sends the same Cookie + * header as the user who originally requested the cached page. Without "Vary: + * Cookie", authenticated users would also be served the anonymous page from + * the cache. If the site has mostly anonymous users except a few known + * editors/administrators, the Vary header can be omitted. This allows for + * better caching in HTTP proxies (including reverse proxies), i.e. even if + * clients send different cookies, they still get content served from the cache. + * However, authenticated users should access the site directly (i.e. not use an + * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid + * getting cached pages from the proxy. + */ +# $settings['omit_vary_cookie'] = TRUE; + + +/** + * Cache TTL for client error (4xx) responses. + * + * Items cached per-URL tend to result in a large number of cache items, and + * this can be problematic on 404 pages which by their nature are unbounded. A + * fixed TTL can be set for these items, defaulting to one hour, so that cache + * backends which do not support LRU can purge older entries. To disable caching + * of client error responses set the value to 0. Currently applies only to + * page_cache module. + */ +# $settings['cache_ttl_4xx'] = 3600; + + +/** + * Class Loader. + * + * If the APC extension is detected, the Symfony APC class loader is used for + * performance reasons. Detection can be prevented by setting + * class_loader_auto_detect to false, as in the example below. + */ +# $settings['class_loader_auto_detect'] = FALSE; + +/* + * If the APC extension is not detected, either because APC is missing or + * because auto-detection has been disabled, auto-loading falls back to + * Composer's ClassLoader, which is good for development as it does not break + * when code is moved in the file system. You can also decorate the base class + * loader with another cached solution than the Symfony APC class loader, as + * all production sites should have a cached class loader of some sort enabled. + * + * To do so, you may decorate and replace the local $class_loader variable. For + * example, to use Symfony's APC class loader without automatic detection, + * uncomment the code below. + */ +/* +if ($settings['hash_salt']) { + $prefix = 'drupal.' . hash('sha256', 'drupal.' . $settings['hash_salt']); + $apc_loader = new \Symfony\Component\ClassLoader\ApcClassLoader($prefix, $class_loader); + unset($prefix); + $class_loader->unregister(); + $apc_loader->register(); + $class_loader = $apc_loader; +} +*/ + +/** + * Authorized file system operations: + * + * The Update Manager module included with Drupal provides a mechanism for + * site administrators to securely install missing updates for the site + * directly through the web user interface. On securely-configured servers, + * the Update manager will require the administrator to provide SSH or FTP + * credentials before allowing the installation to proceed; this allows the + * site to update the new files as the user who owns all the Drupal files, + * instead of as the user the webserver is running as. On servers where the + * webserver user is itself the owner of the Drupal files, the administrator + * will not be prompted for SSH or FTP credentials (note that these server + * setups are common on shared hosting, but are inherently insecure). + * + * Some sites might wish to disable the above functionality, and only update + * the code directly via SSH or FTP themselves. This setting completely + * disables all functionality related to these authorized file operations. + * + * @see https://www.drupal.org/node/244924 + * + * Remove the leading hash signs to disable. + */ +# $settings['allow_authorize_operations'] = FALSE; + +/** + * Default mode for directories and files written by Drupal. + * + * Value should be in PHP Octal Notation, with leading zero. + */ +# $settings['file_chmod_directory'] = 0775; +# $settings['file_chmod_file'] = 0664; + +/** + * Public file base URL: + * + * An alternative base URL to be used for serving public files. This must + * include any leading directory path. + * + * A different value from the domain used by Drupal to be used for accessing + * public files. This can be used for a simple CDN integration, or to improve + * security by serving user-uploaded files from a different domain or subdomain + * pointing to the same server. Do not include a trailing slash. + */ +# $settings['file_public_base_url'] = 'http://downloads.example.com/files'; + +/** + * Public file path: + * + * A local file system path where public files will be stored. This directory + * must exist and be writable by Drupal. This directory must be relative to + * the Drupal installation directory and be accessible over the web. + */ +# $settings['file_public_path'] = 'sites/default/files'; + +/** + * Private file path: + * + * A local file system path where private files will be stored. This directory + * must be absolute, outside of the Drupal installation directory and not + * accessible over the web. + * + * Note: Caches need to be cleared when this value is changed to make the + * private:// stream wrapper available to the system. + * + * See https://www.drupal.org/documentation/modules/file for more information + * about securing private files. + */ +# $settings['file_private_path'] = ''; + +/** + * Session write interval: + * + * Set the minimum interval between each session write to database. + * For performance reasons it defaults to 180. + */ +# $settings['session_write_interval'] = 180; + +/** + * String overrides: + * + * To override specific strings on your site with or without enabling the Locale + * module, add an entry to this list. This functionality allows you to change + * a small number of your site's default English language interface strings. + * + * Remove the leading hash signs to enable. + * + * The "en" part of the variable name, is dynamic and can be any langcode of + * any added language. (eg locale_custom_strings_de for german). + */ +# $settings['locale_custom_strings_en'][''] = array( +# 'forum' => 'Discussion board', +# '@count min' => '@count minutes', +# ); + +/** + * A custom theme for the offline page: + * + * This applies when the site is explicitly set to maintenance mode through the + * administration page or when the database is inactive due to an error. + * The template file should also be copied into the theme. It is located inside + * 'core/modules/system/templates/maintenance-page.html.twig'. + * + * Note: This setting does not apply to installation and update pages. + */ +# $settings['maintenance_theme'] = 'bartik'; + +/** + * PHP settings: + * + * To see what PHP settings are possible, including whether they can be set at + * runtime (by using ini_set()), read the PHP documentation: + * http://php.net/manual/ini.list.php + * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime + * settings and the .htaccess file for non-runtime settings. + * Settings defined there should not be duplicated here so as to avoid conflict + * issues. + */ + +/** + * If you encounter a situation where users post a large amount of text, and + * the result is stripped out upon viewing but can still be edited, Drupal's + * output filter may not have sufficient memory to process it. If you + * experience this issue, you may wish to uncomment the following two lines + * and increase the limits of these variables. For more information, see + * http://php.net/manual/pcre.configuration.php. + */ +# ini_set('pcre.backtrack_limit', 200000); +# ini_set('pcre.recursion_limit', 200000); + +/** + * Active configuration settings. + * + * By default, the active configuration is stored in the database in the + * {config} table. To use a different storage mechanism for the active + * configuration, do the following prior to installing: + * - Create an "active" directory and declare its path in $config_directories + * as explained under the 'Location of the site configuration files' section + * above in this file. To enhance security, you can declare a path that is + * outside your document root. + * - Override the 'bootstrap_config_storage' setting here. It must be set to a + * callable that returns an object that implements + * \Drupal\Core\Config\StorageInterface. + * - Override the service definition 'config.storage.active'. Put this + * override in a services.yml file in the same directory as settings.php + * (definitions in this file will override service definition defaults). + */ +# $settings['bootstrap_config_storage'] = array('Drupal\Core\Config\BootstrapConfigStorageFactory', 'getFileStorage'); + +/** + * Configuration overrides. + * + * To globally override specific configuration values for this site, + * set them here. You usually don't need to use this feature. This is + * useful in a configuration file for a vhost or directory, rather than + * the default settings.php. + * + * Note that any values you provide in these variable overrides will not be + * viewable from the Drupal administration interface. The administration + * interface displays the values stored in configuration so that you can stage + * changes to other environments that don't have the overrides. + * + * There are particular configuration values that are risky to override. For + * example, overriding the list of installed modules in 'core.extension' is not + * supported as module install or uninstall has not occurred. Other examples + * include field storage configuration, because it has effects on database + * structure, and 'core.menu.static_menu_link_overrides' since this is cached in + * a way that is not config override aware. Also, note that changing + * configuration values in settings.php will not fire any of the configuration + * change events. + */ +# $config['system.site']['name'] = 'My Drupal site'; +# $config['system.theme']['default'] = 'stark'; +# $config['user.settings']['anonymous'] = 'Visitor'; + +/** + * Fast 404 pages: + * + * Drupal can generate fully themed 404 pages. However, some of these responses + * are for images or other resource files that are not displayed to the user. + * This can waste bandwidth, and also generate server load. + * + * The options below return a simple, fast 404 page for URLs matching a + * specific pattern: + * - $config['system.performance']['fast_404']['exclude_paths']: A regular + * expression to match paths to exclude, such as images generated by image + * styles, or dynamically-resized images. The default pattern provided below + * also excludes the private file system. If you need to add more paths, you + * can add '|path' to the expression. + * - $config['system.performance']['fast_404']['paths']: A regular expression to + * match paths that should return a simple 404 page, rather than the fully + * themed 404 page. If you don't have any aliases ending in htm or html you + * can add '|s?html?' to the expression. + * - $config['system.performance']['fast_404']['html']: The html to return for + * simple 404 pages. + * + * Remove the leading hash signs if you would like to alter this functionality. + */ +# $config['system.performance']['fast_404']['exclude_paths'] = '/\/(?:styles)|(?:system\/files)\//'; +# $config['system.performance']['fast_404']['paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i'; +# $config['system.performance']['fast_404']['html'] = '404 Not Found

Not Found

The requested URL "@path" was not found on this server.

'; + +/** + * Load services definition file. + */ +$settings['container_yamls'][] = __DIR__ . '/services.yml'; + +/** + * Override the default service container class. + * + * This is useful for example to trace the service container for performance + * tracking purposes, for testing a service container with an error condition or + * to test a service container that throws an exception. + */ +# $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container'; + +/** + * Override the default yaml parser class. + * + * Provide a fully qualified class name here if you would like to provide an + * alternate implementation YAML parser. The class must implement the + * \Drupal\Component\Serialization\SerializationInterface interface. + */ +# $settings['yaml_parser_class'] = NULL; + +/** + * Trusted host configuration. + * + * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host + * header spoofing. + * + * To enable the trusted host mechanism, you enable your allowable hosts + * in $settings['trusted_host_patterns']. This should be an array of regular + * expression patterns, without delimiters, representing the hosts you would + * like to allow. + * + * For example: + * @code + * $settings['trusted_host_patterns'] = array( + * '^www\.example\.com$', + * ); + * @endcode + * will allow the site to only run from www.example.com. + * + * If you are running multisite, or if you are running your site from + * different domain names (eg, you don't redirect http://www.example.com to + * http://example.com), you should specify all of the host patterns that are + * allowed by your site. + * + * For example: + * @code + * $settings['trusted_host_patterns'] = array( + * '^example\.com$', + * '^.+\.example\.com$', + * '^example\.org$', + * '^.+\.example\.org$', + * ); + * @endcode + * will allow the site to run off of all variants of example.com and + * example.org, with all subdomains included. + */ + +/** + * The default list of directories that will be ignored by Drupal's file API. + * + * By default ignore node_modules and bower_components folders to avoid issues + * with common frontend tools and recursive scanning of directories looking for + * extensions. + * + * @see file_scan_directory() + * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory() + */ +$settings['file_scan_ignore_directories'] = [ + 'node_modules', + 'bower_components', +]; + +/** + * Load local development override configuration, if available. + * + * Use settings.local.php to override variables on secondary (staging, + * development, etc) installations of this site. Typically used to disable + * caching, JavaScript/CSS compression, re-routing of outgoing emails, and + * other things that should not happen on development and testing sites. + * + * Keep this code block at the end of this file to take full effect. + */ +# if (file_exists(__DIR__ . '/settings.local.php')) { +# include __DIR__ . '/settings.local.php'; +# }