# # YAFFS file system configurations # config YAFFS_FS tristate "YAFFS2 file system support" default n depends on MTD_BLOCK select YAFFS_YAFFS1 select YAFFS_YAFFS2 help YAFFS2, or Yet Another Flash Filing System, is a filing system optimised for NAND Flash chips. To compile the YAFFS2 file system support as a module, choose M here: the module will be called yaffs2. If unsure, say N. Further information on YAFFS2 is available at . config YAFFS_YAFFS1 bool "512 byte / page devices" depends on YAFFS_FS default y help Enable YAFFS1 support -- yaffs for 512 byte / page devices Not needed for 2K-page devices. If unsure, say Y. config YAFFS_9BYTE_TAGS bool "Use older-style on-NAND data format with pageStatus byte" depends on YAFFS_YAFFS1 default n help Older-style on-NAND data format has a "pageStatus" byte to record chunk/page state. This byte is zero when the page is discarded. Choose this option if you have existing on-NAND data using this format that you need to continue to support. New data written also uses the older-style format. Note: Use of this option generally requires that MTD's oob layout be adjusted to use the older-style format. See notes on tags formats and MTD versions in yaffs_mtdif1.c. If unsure, say N. config YAFFS_DOES_ECC bool "Lets Yaffs do its own ECC" depends on YAFFS_FS && YAFFS_YAFFS1 && !YAFFS_9BYTE_TAGS default n help This enables Yaffs to use its own ECC functions instead of using the ones from the generic MTD-NAND driver. If unsure, say N. config YAFFS_ECC_WRONG_ORDER bool "Use the same ecc byte order as Steven Hill's nand_ecc.c" depends on YAFFS_FS && YAFFS_DOES_ECC && !YAFFS_9BYTE_TAGS default n help This makes yaffs_ecc.c use the same ecc byte order as Steven Hill's nand_ecc.c. If not set, then you get the same ecc byte order as SmartMedia. If unsure, say N. config YAFFS_YAFFS2 bool "2048 byte (or larger) / page devices" depends on YAFFS_FS default y help Enable YAFFS2 support -- yaffs for >= 2K bytes per page devices If unsure, say Y. config YAFFS_AUTO_YAFFS2 bool "Autoselect yaffs2 format" depends on YAFFS_YAFFS2 default y help Without this, you need to explicitely use yaffs2 as the file system type. With this, you can say "yaffs" and yaffs or yaffs2 will be used depending on the device page size (yaffs on 512-byte page devices, yaffs2 on 2K page devices). If unsure, say Y. config YAFFS_DISABLE_TAGS_ECC bool "Disable YAFFS from doing ECC on tags by default" depends on YAFFS_FS && YAFFS_YAFFS2 default n help This defaults Yaffs to using its own ECC calculations on tags instead of just relying on the MTD. This behavior can also be overridden with tags_ecc_on and tags_ecc_off mount options. If unsure, say N. config YAFFS_DISABLE_LAZY_LOAD bool "Disable lazy loading" depends on YAFFS_YAFFS2 default n help "Lazy loading" defers loading file details until they are required. This saves mount time, but makes the first look-up a bit longer. Lazy loading will only happen if enabled by this option being 'n' and if the appropriate tags are available, else yaffs2 will automatically fall back to immediate loading and do the right thing. Lazy laoding will be required by checkpointing. Setting this to 'y' will disable lazy loading. If unsure, say N. config YAFFS_DISABLE_WIDE_TNODES bool "Turn off wide tnodes" depends on YAFFS_FS default n help Wide tnodes are only used for NAND arrays >=32MB for 512-byte page devices and >=128MB for 2k page devices. They use slightly more RAM but are faster since they eliminate chunk group searching. Setting this to 'y' will force tnode width to 16 bits and save memory but make large arrays slower. If unsure, say N. config YAFFS_ALWAYS_CHECK_CHUNK_ERASED bool "Force chunk erase check" depends on YAFFS_FS default n help Normally YAFFS only checks chunks before writing until an erased chunk is found. This helps to detect any partially written chunks that might have happened due to power loss. Enabling this forces on the test that chunks are erased in flash before writing to them. This takes more time but is potentially a bit more secure. Suggest setting Y during development and ironing out driver issues etc. Suggest setting to N if you want faster writing. If unsure, say Y. config YAFFS_SHORT_NAMES_IN_RAM bool "Cache short names in RAM" depends on YAFFS_FS default y help If this config is set, then short names are stored with the yaffs_Object. This costs an extra 16 bytes of RAM per object, but makes look-ups faster. If unsure, say Y. config YAFFS_EMPTY_LOST_AND_FOUND bool "Empty lost and found on boot" depends on YAFFS_FS default n help If this is enabled then the contents of lost and found is automatically dumped at mount.