Remove the support for yaffsram.

[yaffs2.git] / Makefile

diff --git a/Makefile b/Makefile
index 06dd925cf86b2a0fafc350da824fb53fff727690..a210c1e4b63a08c801b89ed070c1545ff0495da5 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -12,13 +12,13 @@
 # it under the terms of the GNU General Public License version 2 as
 # published by the Free Software Foundation.
 #
-# $Id: Makefile,v 1.2 2005-04-29 18:11:30 charles Exp $
+# $Id: Makefile,v 1.6 2005-08-01 20:54:45 luc Exp $
 #
 
 ## Change or override  KERNELDIR to your kernel
 ## comment out USE_xxxx if you don't want these features.
 
-KERNELDIR = /usr/src/kernel-headers-2.4.27
+KERNELDIR = /usr/src/kernels/2.6.11-1.1369_FC4-i686
 
 ## Change if you are using a cross-compiler
 MAKETOOLS = 
@@ -30,36 +30,18 @@ LD=$(MAKETOOLS)ld
 # Comment out the stuff you don't want.
 #
 
-# CONFIG_YAFFS_RAM_ENABLED.
-# This adds the yaffsram file system support. Nice for testing on x86, but uses 2MB of RAM.
-# Don't enable for NAND-based targets.
+# CONFIG_YAFFS_YAFFS1
+# This adds the yaffs file system support for working with a
+# a 512 byte / page NAND mtd.
 
-USE_RAM_FOR_TEST = -DCONFIG_YAFFS_RAM_ENABLED
+USE_MTD = -DCONFIG_YAFFS_YAFFS1
 
+# CONFIG_YAFFS_YAFFS2
+# This adds the yaffs2 file system support for working with a 
+# 2048 or larger byte / page NAND mtd.
 
-# CONFIG_YAFFS_MTD_ENABLED.
-# This adds the yaffs file system support for working with a NAND mtd.
+USE_MTD_2 = -DCONFIG_YAFFS_YAFFS2
 
-USE_MTD = -DCONFIG_YAFFS_MTD_ENABLED
-
-# CONFIG_YAFFS2_RAM_ENABLED.
-# This adds the yaffs2ram file system support. Nice for testing on x86, but uses 2MB of RAM.
-# Don't enable for NAND-based targets.
-
-USE_RAM_FOR_TEST_2 = -DCONFIG_YAFFS2_RAM_ENABLED
-
-
-# CONFIG_YAFFS2_MTD_ENABLED.
-# This adds the yaffs2 file system support for working with a NAND mtd.
-
-USE_MTD_2 = -DCONFIG_YAFFS2_MTD_ENABLED
-
-# CONFIG_YAFFS_USE_OLD_MTD
-# Enable this to use the old MTD stuff that did not have yaffs support.
-# You can use this to get around compilation problems, but the best
-# thing to do is to upgrade your MTD support. You will get better speed.
-
-#USE_OLD_MTD = -DCONFIG_YAFFS_USE_OLD_MTD
 
 # CONFIG_YAFFS_USE_NANDECC
 # This enables the ECC functions of the generic MTD-NAND driver.
@@ -108,12 +90,15 @@ ENABLE_SHORT_NAMES_IN_RAM = -DCONFIG_SHORT_NAMES_IN_RAM
 
 # End of configuration options.
 
-YAFFS_CONFIGS = $(USE_RAM_FOR_TEST) $(USE_MTD) $(USE_RAM_FOR_TEST_2) $(USE_MTD_2)\
+WIERD_COMPILE_CONFIGS = -DNR_IRQS=1 -DNR_IRQ_VECTORS=1
+
+YAFFS_CONFIGS = $(WIERD_COMPILE_CONFIGS) \
+                $(USE_RAM_FOR_TEST) $(USE_MTD) $(USE_RAM_FOR_TEST_2) $(USE_MTD_2)\
                 $(USE_HEADER_FILE_SIZE) $(IGNORE_CHUNK_ERASED) $(IGNORE_WRITE_VERIFY) \
-                $(ENABLE_SHORT_NAMES_IN_RAM) $(USE_NANDECC) $(USE_OLD_MTD) $(USE_WRONGECC)
+                $(ENABLE_SHORT_NAMES_IN_RAM) $(USE_NANDECC) $(USE_WRONGECC)
 
 
-YAFFS2_CONFIGS = $(YAFFS_CONFIGS) -DCONFIG_YAFFS_YAFFS2
+YAFFS2_CONFIGS = $(YAFFS_CONFIGS)
 
 CFLAGS = -D__KERNEL__ -DMODULE $(YAFFS2_CONFIGS)  -I$(KERNELDIR)/include -O2 -g -Wall