X-Git-Url: http://www.aleph1.co.uk/gitweb/?p=yaffs2.git;a=blobdiff_plain;f=Kconfig;h=658feea5ff55ef43a692b33c38f3aefa73b21524;hp=de151639019fa5d9f93df20ea5b67c59529e5954;hb=6648cbf52d6695755941ff8607fd7a0cda542e05;hpb=a4d9ea92251deb3c1389e3e3443faf4341f817db

diff --git a/Kconfig b/Kconfig
index de15163..658feea 100644
--- a/Kconfig
+++ b/Kconfig
@@ -1,23 +1,23 @@
 #
-# YAFFS file system configurations
+# yaffs file system configurations
 #
 
 config YAFFS_FS
-	tristate "YAFFS2 file system support"
+	tristate "yaffs2 file system support"
 	default n
-	depends on MTD
+	depends on MTD_BLOCK
 	select YAFFS_YAFFS1
 	select YAFFS_YAFFS2
 	help
-	  YAFFS2, or Yet Another Flash Filing System, is a filing system
+	  yaffs2, or Yet Another Flash File System, is a file system
 	  optimised for NAND Flash chips.
 
-	  To compile the YAFFS2 file system support as a module, choose M
+	  To compile the yaffs2 file system support as a module, choose M
 	  here: the module will be called yaffs2.
 
 	  If unsure, say N.
 
-	  Further information on YAFFS2 is available at
+	  Further information on yaffs2 is available at
 	  <http://www.aleph1.co.uk/yaffs/>.
 
 config YAFFS_YAFFS1
@@ -25,7 +25,7 @@ config YAFFS_YAFFS1
 	depends on YAFFS_FS
 	default y
 	help
-	  Enable YAFFS1 support -- yaffs for 512 byte / page devices
+	  Enable yaffs1 support -- yaffs for 512 byte / page devices
 
 	  Not needed for 2K-page devices.
 
@@ -49,11 +49,11 @@ config YAFFS_9BYTE_TAGS
 	  If unsure, say N.
 
 config YAFFS_DOES_ECC
-	bool "Lets Yaffs do its own ECC"
+	bool "Lets yaffs do its own ECC"
 	depends on YAFFS_FS && YAFFS_YAFFS1 && !YAFFS_9BYTE_TAGS
 	default n
 	help
-	  This enables Yaffs to use its own ECC functions instead of using
+	  This enables yaffs to use its own ECC functions instead of using
 	  the ones from the generic MTD-NAND driver.
 
 	  If unsure, say N.
@@ -74,7 +74,7 @@ config YAFFS_YAFFS2
 	depends on YAFFS_FS
 	default y
 	help
-	  Enable YAFFS2 support -- yaffs for >= 2K bytes per page devices
+	  Enable yaffs2 support -- yaffs for >= 2K bytes per page devices
 
 	  If unsure, say Y.
 
@@ -90,39 +90,15 @@ config YAFFS_AUTO_YAFFS2
 
 	  If unsure, say Y.
 
-config YAFFS_DISABLE_LAZY_LOAD
-	bool "Disable lazy loading"
-	depends on YAFFS_YAFFS2
-	default n
-	help
-	  "Lazy loading" defers loading file details until they are
-	  required. This saves mount time, but makes the first look-up
-	  a bit longer.
-
-	  Lazy loading will only happen if enabled by this option being 'n'
-	  and if the appropriate tags are available, else yaffs2 will
-	  automatically fall back to immediate loading and do the right
-	  thing.
-
-	  Lazy laoding will be required by checkpointing.
-
-	  Setting this to 'y' will disable lazy loading.
-
-	  If unsure, say N.
-
-
-config YAFFS_DISABLE_WIDE_TNODES
-	bool "Turn off wide tnodes"
-	depends on YAFFS_FS
+config YAFFS_DISABLE_TAGS_ECC
+	bool "Disable yaffs from doing ECC on tags by default"
+	depends on YAFFS_FS && YAFFS_YAFFS2
 	default n
 	help
-	  Wide tnodes are only used for NAND arrays >=32MB for 512-byte
-	  page devices and >=128MB for 2k page devices. They use slightly
-	  more RAM but are faster since they eliminate chunk group
-	  searching.
-
-	  Setting this to 'y' will force tnode width to 16 bits and save
-	  memory but make large arrays slower.
+	  This defaults yaffs to using its own ECC calculations on tags instead of
+	  just relying on the MTD.
+	  This behavior can also be overridden with tags_ecc_on and
+	  tags_ecc_off mount options.
 
 	  If unsure, say N.
 
@@ -131,7 +107,7 @@ config YAFFS_ALWAYS_CHECK_CHUNK_ERASED
 	depends on YAFFS_FS
 	default n
 	help
-          Normally YAFFS only checks chunks before writing until an erased
+          Normally yaffs only checks chunks before writing until an erased
 	  chunk is found. This helps to detect any partially written
 	  chunks that might have happened due to power loss.
 
@@ -144,13 +120,42 @@ config YAFFS_ALWAYS_CHECK_CHUNK_ERASED
 
 	  If unsure, say Y.
 
-config YAFFS_SHORT_NAMES_IN_RAM
-	bool "Cache short names in RAM"
+config YAFFS_EMPTY_LOST_AND_FOUND
+	bool "Empty lost and found on boot"
 	depends on YAFFS_FS
-	default y
+	default n
 	help
-	  If this config is set, then short names are stored with the
-	  yaffs_Object.  This costs an extra 16 bytes of RAM per object,
-	  but makes look-ups faster.
+	  If this is enabled then the contents of lost and found is
+	  automatically dumped at mount.
 
-	  If unsure, say Y.
+	  If unsure, say N.
+
+config YAFFS_DISABLE_BLOCK_REFRESHING
+	bool "Disable yaffs2 block refreshing"
+	depends on YAFFS_FS
+	default n
+	help
+	 If this is set, then block refreshing is disabled.
+	 Block refreshing infrequently refreshes the oldest block in
+	 a yaffs2 file system. This mechanism helps to refresh flash to
+	 mitigate against data loss. This is particularly useful for MLC.
+
+	  If unsure, say N.
+
+config YAFFS_DISABLE_BACKGROUND
+	bool "Disable yaffs2 background processing"
+	depends on YAFFS_FS
+	default n
+	help
+	 If this is set, then background processing is disabled.
+	 Background processing makes many foreground activities faster.
+
+	 If unsure, say N.
+
+config YAFFS_XATTR
+	bool "Enable yaffs2 xattr support"
+	depends on YAFFS_FS
+	default y
+	help
+	 If this is set then yaffs2 will provide xattr support.
+	 If unsure, say Y.