Hi Frank, Thanks a lot. Now i need to test these. Nobin Mathew On 6/26/07, Nobin Mathew wrote: > Yes now i got it > > On 6/26/07, Nobin Mathew wrote: > > Thanks > > > > But I am not able to open that link, says error. Even i am not able to > > open info page of that mailing list > > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > > > > On 6/26/07, Frank Mandarino wrote: > > > Frank Mandarino wrote: > > > > Nobin Mathew wrote: > > > >> Is there any support for writing yaffs2 file system image from u-boot > > > >> to nand flash. > > > >> > > > >> I created the file system using mkyaffs2image utility. > > > >> > > > >> > > > >> I mean using u-boot command "nand write" > > > >> > > > >> When I use this to write image I am not able to boot from that, it > > > >> mounts yaffs2 but gives the error "initial console not found". > > > >> > > > >> But if I use the mtd utilities flash_eraseall and nandwrite then I am > > > >> able to boot from that > > > >> > > > >> I use those utilities with following options > > > >> > > > >> ./flash_eraseall /dev/mtdX > > > >> ./nandwrite -a -o /dev/mtdX yaffs2.img > > > >> > > > >> Thanks > > > >> Nobin Mathew > > > > > > > > Hi Nobin, > > > > > > > > I posted a patch a while back to u-boot-devel, which adds support for > > > > writing yaffs1 and yaffs2 images. I have only tested yaffs1. > > > > > > > > I don't have a link right now, but if you can't find it, let me know. > > > > > > > > ../fam > > > > > > Oops. I meant u-boot-users. Here is a link: > > > > > > http://sourceforge.net/mailarchive/message.php?msg_name=el7f2l%24eo1%241%40sea.gmane.org > > > > > > Regards, > > > ../fam > > > -- > > > Frank Mandarino fmandarino(a)endrelia.com > > > Endrelia Technologies Inc. > > > Toronto, Ontario, Canada > > > > > > > > > _______________________________________________ > > > yaffs mailing list > > > yaffs@lists.aleph1.co.uk > > > http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs > > > > > >