Update timothy test Makefile

[yaffs2.git] / direct / timothy_tests / linux_tests / README.txt

diff --git a/direct/timothy_tests/linux_tests/README.txt b/direct/timothy_tests/linux_tests/README.txt
index 41c2812771f701108a0c803fdfb677870cb5cdbb..be8b831c1b8673f74195fcd6d503ed46c0c515c9 100644 (file)
--- a/direct/timothy_tests/linux_tests/README.txt
+++ b/direct/timothy_tests/linux_tests/README.txt
@@ -1,22 +1,48 @@
 
+linux_test.c tests yaffs running under linux using the nandsim generator.  
+
+
+If a segmentation fault happens during the test then check that 
+the nandsim has been initilised properly. 
+
 How to initilise the nandsim
 
 $ make
 
 $ sudo -s
 ...password..
-# now have a root shell
+# now you have a root shell
 $ ./linux-tests/initnandsim 128MiB-2048
 $ insmod yaffs2multi.ko
 $ mkdir /mnt/y
 $ mount -t yaffs2 /dev/mtdblock0 /mnt/y
 
+
+
 How to change the permissions on the nandsim partition
+
 $ sudo chmod a+wr /mnt/y/
 #check the permission change
 $ touch /mnt/y/test_file
 
 How to clean the folder
+
 $ rm -rf /mnt/y
 
-The test must me run in sudo to work
+
+The test must be run in sudo to work to allow the files to be 
+created in the root folders.
+
+compile command: make
+run command: sudo ./linux_test
+
+command line options:
+       -h                      display the command line options.
+       -s [number]     seeds the rand with the number.
+       -p [number]     sets the print level to the number. 
+                               the higher the number the more low level commands are printed.
+                               the number should be between 0 and 5.
+       -v                      verbose mode. everything is printed.
+       -q                      quite mode. nothing is printed.
+
+