yaffs: Change all yaffs, YAFFS and Yaffs in Kconfig to yaffs

[yaffs2.git] / Kconfig

diff --git a/Kconfig b/Kconfig
index 7b3988c3a01474d89b742d253c1d82793876b96a..658feea5ff55ef43a692b33c38f3aefa73b21524 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -1,23 +1,23 @@
 #
 #

-# YAFFS file system configurations
+# yaffs file system configurations

 #
 
 config YAFFS_FS
 #
 
 config YAFFS_FS

-       tristate "YAFFS2 file system support"
+       tristate "yaffs2 file system support"

        default n
        depends on MTD_BLOCK
        select YAFFS_YAFFS1
        select YAFFS_YAFFS2
        help
        default n
        depends on MTD_BLOCK
        select YAFFS_YAFFS1
        select YAFFS_YAFFS2
        help

-         YAFFS2, or Yet Another Flash Filing System, is a filing system
+         yaffs2, or Yet Another Flash File System, is a file system

          optimised for NAND Flash chips.
 
          optimised for NAND Flash chips.
 

-         To compile the YAFFS2 file system support as a module, choose M
+         To compile the yaffs2 file system support as a module, choose M

          here: the module will be called yaffs2.
 
          If unsure, say N.
 
          here: the module will be called yaffs2.
 
          If unsure, say N.
 

-         Further information on YAFFS2 is available at
+         Further information on yaffs2 is available at

          <http://www.aleph1.co.uk/yaffs/>.
 
 config YAFFS_YAFFS1
          <http://www.aleph1.co.uk/yaffs/>.
 
 config YAFFS_YAFFS1


@@ -25,7 +25,7 @@ config YAFFS_YAFFS1
        depends on YAFFS_FS
        default y
        help
        depends on YAFFS_FS
        default y
        help

-         Enable YAFFS1 support -- yaffs for 512 byte / page devices
+         Enable yaffs1 support -- yaffs for 512 byte / page devices

 
          Not needed for 2K-page devices.
 
 
          Not needed for 2K-page devices.
 


@@ -49,11 +49,11 @@ config YAFFS_9BYTE_TAGS
          If unsure, say N.
 
 config YAFFS_DOES_ECC
          If unsure, say N.
 
 config YAFFS_DOES_ECC

-       bool "Lets Yaffs do its own ECC"
+       bool "Lets yaffs do its own ECC"

        depends on YAFFS_FS && YAFFS_YAFFS1 && !YAFFS_9BYTE_TAGS
        default n
        help
        depends on YAFFS_FS && YAFFS_YAFFS1 && !YAFFS_9BYTE_TAGS
        default n
        help

-         This enables Yaffs to use its own ECC functions instead of using
+         This enables yaffs to use its own ECC functions instead of using

          the ones from the generic MTD-NAND driver.
 
          If unsure, say N.
          the ones from the generic MTD-NAND driver.
 
          If unsure, say N.


@@ -74,7 +74,7 @@ config YAFFS_YAFFS2
        depends on YAFFS_FS
        default y
        help
        depends on YAFFS_FS
        default y
        help

-         Enable YAFFS2 support -- yaffs for >= 2K bytes per page devices
+         Enable yaffs2 support -- yaffs for >= 2K bytes per page devices

 
          If unsure, say Y.
 
 
          If unsure, say Y.
 


@@ -91,39 +91,23 @@ config YAFFS_AUTO_YAFFS2
          If unsure, say Y.
 
 config YAFFS_DISABLE_TAGS_ECC
          If unsure, say Y.
 
 config YAFFS_DISABLE_TAGS_ECC

-       bool "Disable YAFFS from doing ECC on tags by default"
+       bool "Disable yaffs from doing ECC on tags by default"

        depends on YAFFS_FS && YAFFS_YAFFS2
        default n
        help
        depends on YAFFS_FS && YAFFS_YAFFS2
        default n
        help

-         This defaults Yaffs to using its own ECC calculations on tags instead of
+         This defaults yaffs to using its own ECC calculations on tags instead of

          just relying on the MTD.
          This behavior can also be overridden with tags_ecc_on and
          tags_ecc_off mount options.
 
          If unsure, say N.
 
          just relying on the MTD.
          This behavior can also be overridden with tags_ecc_on and
          tags_ecc_off mount options.
 
          If unsure, say N.
 

-
-config YAFFS_DISABLE_WIDE_TNODES
-       bool "Turn off wide tnodes"
-       depends on YAFFS_FS
-       default n
-       help
-         Wide tnodes are only used for NAND arrays >=32MB for 512-byte
-         page devices and >=128MB for 2k page devices. They use slightly
-         more RAM but are faster since they eliminate chunk group
-         searching.
-
-         Setting this to 'y' will force tnode width to 16 bits and save
-         memory but make large arrays slower.
-
-         If unsure, say N.
-

 config YAFFS_ALWAYS_CHECK_CHUNK_ERASED
        bool "Force chunk erase check"
        depends on YAFFS_FS
        default n
        help
 config YAFFS_ALWAYS_CHECK_CHUNK_ERASED
        bool "Force chunk erase check"
        depends on YAFFS_FS
        default n
        help

-          Normally YAFFS only checks chunks before writing until an erased
+          Normally yaffs only checks chunks before writing until an erased

          chunk is found. This helps to detect any partially written
          chunks that might have happened due to power loss.
 
          chunk is found. This helps to detect any partially written
          chunks that might have happened due to power loss.
 


@@ -136,17 +120,6 @@ config YAFFS_ALWAYS_CHECK_CHUNK_ERASED
 
          If unsure, say Y.
 
 
          If unsure, say Y.
 

-config YAFFS_SHORT_NAMES_IN_RAM
-       bool "Cache short names in RAM"
-       depends on YAFFS_FS
-       default y
-       help
-         If this config is set, then short names are stored with the
-         yaffs_Object.  This costs an extra 16 bytes of RAM per object,
-         but makes look-ups faster.
-
-         If unsure, say Y.
-

 config YAFFS_EMPTY_LOST_AND_FOUND
        bool "Empty lost and found on boot"
        depends on YAFFS_FS
 config YAFFS_EMPTY_LOST_AND_FOUND
        bool "Empty lost and found on boot"
        depends on YAFFS_FS


@@ -177,7 +150,7 @@ config YAFFS_DISABLE_BACKGROUND
         If this is set, then background processing is disabled.
         Background processing makes many foreground activities faster.
 
         If this is set, then background processing is disabled.
         Background processing makes many foreground activities faster.
 

-         If unsure, say N.
+        If unsure, say N.

 
 config YAFFS_XATTR
        bool "Enable yaffs2 xattr support"
 
 config YAFFS_XATTR
        bool "Enable yaffs2 xattr support"


@@ -186,5 +159,3 @@ config YAFFS_XATTR
        help
         If this is set then yaffs2 will provide xattr support.
         If unsure, say Y.
        help
         If this is set then yaffs2 will provide xattr support.
         If unsure, say Y.

-
-