+++ /dev/null
-Made by Timothy Manning <timothy@yaffs.net> on 04/11/2010
-
-This test is designed to test the response and error handling of the yaffs functions.
-
-compile command: make
-run command: ./quick_tests
-
-command line options:
- -h prints the available command line options.
- -c tests will continue even if a test fails, rather than exiting the test.
- -v verbose mode. will print all messages.
- -q quiet mode. will not print any messages.
- -t [number] sets the yaffs_trace() function to the number.
- -n [number] sets the number of randomly selected tests to run after the test has run through
- after running all of listed tests.
-
-############################# development infomation ####################################################################
-
-Tests made
-
-test_yaffs_access.c
-test_yaffs_access_EACCES.c
-test_yaffs_access_EINVAL.c
-test_yaffs_access_ELOOP.c
-test_yaffs_access_ELOOP_dir.c
-test_yaffs_access_ENAMETOOLONG.c
-test_yaffs_access_ENOENT2.c
-test_yaffs_access_ENOENT.c
-test_yaffs_access_ENOTDIR.c
-test_yaffs_access_EROFS.c
-test_yaffs_access_NULL.c
-
-test_yaffs_chmod.c
-test_yaffs_chmod_EINVAL.c
-test_yaffs_chmod_ELOOP.c
-test_yaffs_chmod_ELOOP_dir.c
-test_yaffs_chmod_ENAMETOOLONG.c
-test_yaffs_chmod_ENOENT2.c
-test_yaffs_chmod_ENOENT.c
-test_yaffs_chmod_ENOTDIR.c
-test_yaffs_chmod_EROFS.c
-test_yaffs_chmod_NULL.c
-
-test_yaffs_close.c
-test_yaffs_close_EBADF.c
-test_yaffs_close_NULL.c
-
-test_yaffs_dup.c
-test_yaffs_dup_EBADF.c
-
-test_yaffs_fchmod.c
-test_yaffs_fchmod_EBADF.c
-test_yaffs_fchmod_EINVAL.c
-test_yaffs_fchmod_EROFS.c
-test_yaffs_fchmod_NULL.c
-
-test_yaffs_fdatasync.c
-test_yaffs_fdatasync_EBADF.c
-test_yaffs_fdatasync_EROFS.c
-test_yaffs_fdatasync_NULL.c
-
-test_yaffs_flush.c
-test_yaffs_flush_EBADF.c
-test_yaffs_flush_EROFS.c
-
-test_yaffs_freespace.c
-test_yaffs_freespace_EINVAL.c
-test_yaffs_freespace_ENAMETOOLONG.c
-test_yaffs_freespace_NULL.c
-
-test_yaffs_fstat.c
-test_yaffs_fstat_EBADF.c
-
-test_yaffs_fsync.c
-test_yaffs_fsync_EBADF.c
-test_yaffs_fsync_EROFS.c
-
-test_yaffs_ftruncate_big_file.c
-test_yaffs_ftruncate.c
-test_yaffs_ftruncate_EBADF.c
-test_yaffs_ftruncate_EINVAL.c
-test_yaffs_ftruncate_EROFS.c
-
-test_yaffs_inodecount.c
-test_yaffs_inodecount_EINVAL.c
-test_yaffs_inodecount_ENAMETOOLONG.c
-test_yaffs_inodecount_NULL.c
-
-test_yaffs_link.c
-test_yaffs_link_EEXIST.c
-test_yaffs_link_ELOOP_dir.c
-test_yaffs_link_ENAMETOOLONG2.c
-test_yaffs_link_ENAMETOOLONG.c
-test_yaffs_link_ENOENT2.c
-test_yaffs_link_ENOENT3.c
-test_yaffs_link_ENOENT4.c
-test_yaffs_link_ENOENT.c
-test_yaffs_link_ENOTDIR2.c
-test_yaffs_link_ENOTDIR.c
-test_yaffs_link_EROFS.c
-test_yaffs_link_NULL2.c
-test_yaffs_link_NULL.c
-
-test_yaffs_lseek_big_file.c
-test_yaffs_lseek.c
-test_yaffs_lseek_EBADF.c
-test_yaffs_lseek_EINVAL.c
-test_yaffs_lseek_EROFS.c
-
-test_yaffs_lstat.c
-test_yaffs_lstat_ENAMETOOLONG.c
-test_yaffs_lstat_ENOENT.c
-test_yaffs_lstat_ENOTDIR.c
-test_yaffs_lstat_NULL.c
-
-test_yaffs_mkdir.c
-test_yaffs_mkdir_EEXIST.c
-test_yaffs_mkdir_ELOOP_dir.c
-test_yaffs_mkdir_ENAMETOOLONG.c
-test_yaffs_mkdir_ENOENT.c
-test_yaffs_mkdir_ENOTDIR.c
-test_yaffs_mkdir_EROFS.c
-test_yaffs_mkdir_NULL.c
-
-test_yaffs_mount2.c
-test_yaffs_mount2_ENODEV.c
-
-test_yaffs_mount.c
-test_yaffs_mount_EBUSY.c
-test_yaffs_mount_ENAMETOOLONG.c
-test_yaffs_mount_ENODEV.c
-test_yaffs_mount_NULL.c
-
-test_yaffs_open.c
-test_yaffs_open_EACCES.c
-test_yaffs_open_EEXIST.c
-test_yaffs_open_EINVAL2.c
-test_yaffs_open_EINVAL.c
-test_yaffs_open_EISDIR.c
-test_yaffs_open_ELOOP.c
-test_yaffs_open_ELOOP_dir.c
-test_yaffs_open_ENAMETOOLONG.c
-test_yaffs_open_ENOENT.c
-test_yaffs_open_ENOTDIR.c
-test_yaffs_open_EROFS.c
-test_yaffs_open_NULL.c
-
-test_yaffs_read.c
-test_yaffs_read_EBADF.c
-test_yaffs_read_EINVAL.c
-
-test_yaffs_remount_EINVAL.c
-test_yaffs_remount_ENAMETOOLONG.c
-test_yaffs_remount_ENODEV.c
-test_yaffs_remount_force_off_read_only_off.c
-test_yaffs_remount_force_off_read_only_on.c
-test_yaffs_remount_force_on_read_only_off.c
-test_yaffs_remount_force_on_read_only_on.c
-test_yaffs_remount_NULL.c
-
-test_yaffs_rename.c
-test_yaffs_rename_dir.c
-test_yaffs_rename_dir_ENOENT2.c
-test_yaffs_rename_dir_ENOENT.c
-test_yaffs_rename_dir_not_empty.c
-test_yaffs_rename_dir_to_file.c
-test_yaffs_rename_EEXISTS.c
-test_yaffs_rename_EINVAL.c
-test_yaffs_rename_ELOOP_dir.c
-test_yaffs_rename_ENAMETOOLONG2.c
-test_yaffs_rename_ENAMETOOLONG.c
-test_yaffs_rename_ENOENT.c
-test_yaffs_rename_ENOTDIR.c
-test_yaffs_rename_EROFS.c
-test_yaffs_rename_file_to_dir.c
-test_yaffs_rename_NULL2.c
-test_yaffs_rename_NULL.c
-
-test_yaffs_rmdir.c
-test_yaffs_rmdir_EBUSY.c
-test_yaffs_rmdir_EINVAL.c
-test_yaffs_rmdir_ELOOP_dir.c
-test_yaffs_rmdir_ENAMETOOLONG.c
-test_yaffs_rmdir_ENOENT.c
-test_yaffs_rmdir_ENOTDIR.c
-test_yaffs_rmdir_EROFS.c
-test_yaffs_rmdir_NULL.c
-
-test_yaffs_stat.c
-test_yaffs_stat_ELOOP.c
-test_yaffs_stat_ELOOP_dir.c
-test_yaffs_stat_ENAMETOOLONG.c
-test_yaffs_stat_ENOENT2.c
-test_yaffs_stat_ENOENT.c
-test_yaffs_stat_ENOTDIR.c
-test_yaffs_stat_NULL.c
-
-test_yaffs_symlink.c
-test_yaffs_symlink_EEXIST.c
-test_yaffs_symlink_ELOOP_dir.c
-test_yaffs_symlink_ENAMETOOLONG.c
-test_yaffs_symlink_ENOENT2.c
-test_yaffs_symlink_ENOENT.c
-test_yaffs_symlink_ENOTDIR.c
-test_yaffs_symlink_EROFS.c
-test_yaffs_symlink_NULL2.c
-test_yaffs_symlink_NULL.c
-
-test_yaffs_sync.c
-test_yaffs_sync_ENAMETOOLONG.c
-test_yaffs_sync_ENODEV.c
-test_yaffs_sync_EROFS.c
-test_yaffs_sync_NULL.c
-
-test_yaffs_totalspace.c
-test_yaffs_totalspace_EINVAL.c
-test_yaffs_totalspace_ENAMETOOLONG.c
-test_yaffs_totalspace_NULL.c
-
-test_yaffs_truncate_big_file.c
-test_yaffs_truncate.c
-test_yaffs_truncate_EINVAL.c
-test_yaffs_truncate_EISDIR.c
-test_yaffs_truncate_ELOOP.c
-test_yaffs_truncate_ELOOP_dir.c
-test_yaffs_truncate_ENAMETOOLONG.c
-test_yaffs_truncate_ENOENT2.c
-test_yaffs_truncate_ENOENT.c
-test_yaffs_truncate_ENOTDIR.c
-test_yaffs_truncate_EROFS.c
-test_yaffs_truncate_NULL.c
-
-test_yaffs_unlink.c
-test_yaffs_unlink_EISDIR.c
-test_yaffs_unlink_ELOOP_dir.c
-test_yaffs_unlink_ENAMETOOLONG.c
-test_yaffs_unlink_ENOENT2.c
-test_yaffs_unlink_ENOENT.c
-test_yaffs_unlink_ENOTDIR.c
-test_yaffs_unlink_EROFS.c
-test_yaffs_unlink_NULL.c
-
-test_yaffs_unmount2.c
-test_yaffs_unmount2_EINVAL.c
-test_yaffs_unmount2_ENODEV.c
-test_yaffs_unmount2_with_handle_open_and_forced_mode_off.c
-test_yaffs_unmount2_with_handle_open_and_forced_mode_on.c
-test_yaffs_unmount.c
-test_yaffs_unmount_EBUSY.c
-test_yaffs_unmount_ENAMETOOLONG.c
-test_yaffs_unmount_ENODEV.c
-test_yaffs_unmount_NULL.c
-
-test_yaffs_write_big_file.c
-test_yaffs_write.c
-test_yaffs_write_EBADF.c
-test_yaffs_write_EROFS.c
-
-
-
-Tests to add
-
- test_yaffs_rename a file over its self.
-
- test_yaffs_readlink
- test_yaffs_readlink_ENOENT
- test_yaffs_readlink_ENOTDIR
- test_yaffs_readlink_ELOOP
-
- test_yaffs_mount2_with read only set
-
- test_yaffs_remount_force_off_read_only_on
- test_yaffs_remount_force_on_read_only_on
-
- test_yaffs_opendir
-
- test_yaffs_readdir
-
- test_yaffs_rewinddir
-
- test_yaffs_closedir
-
- test_yaffs_link_EPERM
-
- test_yaffs_rmdir_ENOTEMPTY
-
- test_yaffs_rename_EMLINK
- test_yaffs_rename_EEXISTS or EPERM
-
- test_yaffs_open_ENOSPC
-
- test yaffs_open_running_out_of_handles error
-
- test_yaffs_read_big_file
- test what happens if you read off the end of the file?
-
- test_yaffs_pread
- test_yaffs_pread_EBADF
- test_yaffs_pread_EINVAL
- test_yaffs_pread_big_file
-
- test_yaffs_write_big_file
- test_yaffs_write_EINVAL
- What happens when you run out of space?
-
-
- test_yaffs_pwrite_big_file
- test_yaffs_pwrite_EINVAL
-
- test_yaffs_unlink_ENOMEM
-
- test_yaffs_access_ENOENT_generated_with_a_dangling_symbloic_link
-
- Add a truncate function for truncating a file size to -1.
-
- What happens if a handle is opened to a file and the file is then deleted?
- Check to see if yaffs generates an error code for no reason.
- What happens when a file is opened with no modes set?
-
- What happens when yaffs is unmounted twice?
-
- What happens when open a handle, unmount yaffs and then try to use the handle?
-
- What happens when a mount point is mounted using mount2 with read only mode set and then a file is chmoded?
-
- Try to remove lost and found dir and replace it with a file of the same name.
-
- Change the mode of the lost and found dir to read only.
-
-Tests which do not exist in yaffs:
- test_yaffs_close //This function has already been called by the time this test is reached,
- //so there is no point in testing it.
-
- test_yaffs_link_EMLINK //should not happen on yaffs
- test_yaffs_link_ELOOP
-
- test_yaffs_lstat_ELOOP
-
- test_yaffs_mkdir_ELOOP
-
- //the yaffs_mknod function does not exist in yaffsfs, so these tests will not be added.
- test_yaffs_mknod_EACCES
- test_yaffs_mknod_EEXIST
- test_yaffs_mknod_EINVAL
- test_yaffs_mknod_ELOOP
- test_yaffs_mknod_ENAMETOOLONG
- test_yaffs_mknod_ENOENT
- test_yaffs_mknod_ENOTDIR
- test_yaffs_mknod_EROFS
-
- teat_yaffs_mount_ELOOP
-
- test_yaffs_mount2_EINVAL //cannot happen in yaffs since the mode is not checked.
- test_yaffs_mount2_ENOTDIR //cannot be generated in yaffs.
- test_yaffs_mount2_ENOENT //cannot be generated in yaffs.
- test_yaffs_mount2_ELOOP
-
- test_yaffs_remount_ENOENT //cannot be generated in yaffs
- test_yaffs_remount_ENOTDIR //cannot be generated in yaffs
-
- test_yaffs_unmount2_ENOENT //cannot be generated in yaffs.
- test_yaffs_unmount2_ENOTDIR //cannot be generated in yaffs.
-
-How to add a test
- First create the test .c and .h file.
- The file name and test function name should be the same.
- This name should follow one of these formats:
- Test_yaffs_[function of yaffs which is been tested]
- Test_yaffs_[function of yaffs which is been tested]_[error trying to be generated]
-
- The .c file needs to contain two functions.
- The first function needs to contain the code for the main test and will
- return -1 on a failure and 0 or greater on a success.
- The second function needs contain the code for cleaning up after the test.
- Cleaning up may include closing some open handles, recreating a file, ect.
- This second function needs to return -1 on a failure and 0 or greater on success.
-
- The name of first function needs to be called the same as the file
- name (without the .c or .h)
- The second function's name needs be the same as the first function but
- with "_clean" added on the end.
-
- So if a test is been created for the yaffs function yaffs_foo() then
- create these files
- test_yaffs_foo.c
- Contains int test_yaffs_foo(void); int test_yaffs_foo_clean(void);
- test_yaffs_foo.h
- Which includes "lib.h", "yaffsfs.h" header files.
-
- Next write the test code in these files then add these files to the Makefile.
-
- Add the name of the test files' object file (test_yaffs_foo.o ) to the
- TESTFILES tag around line 50 of the Makefile.
-
- Now add the test functions to the test_list[] array in quick_tests.h
- The order of the tests matters. The idea is to test each yaffs_function
- individualy and only using tested yaffs_components before using this new
- yaffs_function.
- This array consists of:
- {[test function], [the clean function], [name of the tests which will be printed when the test fails]},
-
- So add this line to the test_list[]: {test_yaffs_foo, test_yaffs_foo_clean, "test_yaffs_foo"},
-
- Also include the test's .h file in the quick_test.h file: #include "test_yaffs_foo.h"
-
- The test file should now make and run(you may need to make clean first).
-
-
-
- PS: yaffs_foo() is a made up function for this README (in case you want
- to find this function in yaffs).
-
-
-
-
-
-
projects / yaffs2.git / blobdiff