yaffs Added some more tests to direct/timothy_tests/quick_tests
[yaffs2.git] / direct / timothy_tests / quick_tests / README.txt
index 33b93e71b91e5a2caaac08796f0da4919e8663da..39fa4ca8e6ad01804aca5093bed2020700f6eb4b 100644 (file)
@@ -2,7 +2,362 @@
 Made by Timothy Manning <timothy@yaffs.net> on 04/11/2010
 
 
 Made by Timothy Manning <timothy@yaffs.net> on 04/11/2010
 
 
+Tests made
 
 
+test_yaffs_access.c
+test_yaffs_access_EINVAL.c
+test_yaffs_access_ELOOP.c
+test_yaffs_access_ELOOP_dir.c
+test_yaffs_access_ENOENT2.c
+test_yaffs_access_ENOENT.c
+test_yaffs_access_ENOTDIR.c
+test_yaffs_access_EROFS.c
+
+test_yaffs_chmod.c
+test_yaffs_chmod_EINVAL.c
+test_yaffs_chmod_ELOOP.c
+test_yaffs_chmod_ELOOP_dir.c
+test_yaffs_chmod_ENOENT2.c
+test_yaffs_chmod_ENOENT.c
+test_yaffs_chmod_ENOTDIR.c
+test_yaffs_chmod_EROFS.c
+
+test_yaffs_close.c
+test_yaffs_close_EBADF.c
+
+test_yaffs_fchmod.c
+test_yaffs_fchmod_EBADF.c
+test_yaffs_fchmod_EINVAL.c
+test_yaffs_fchmod_EROFS.c
+
+test_yaffs_fdatasync.c
+test_yaffs_fdatasync_EBADF.c
+test_yaffs_fdatasync_EROFS.c
+
+test_yaffs_flush.c
+test_yaffs_flush_EBADF.c
+test_yaffs_flush_EROFS.c
+
+test_yaffs_freespace.c
+test_yaffs_freespace_EINVAL.c
+
+test_yaffs_fstat.c
+test_yaffs_fstat_EBADF.c
+
+test_yaffs_fsync.c
+test_yaffs_fsync_EBADF.c
+test_yaffs_fsync_EROFS.c
+
+test_yaffs_ftruncate_big_file.c
+test_yaffs_ftruncate.c
+test_yaffs_ftruncate_EBADF.c
+test_yaffs_ftruncate_EINVAL.c
+test_yaffs_ftruncate_EROFS.c
+
+test_yaffs_inodecount.c
+test_yaffs_inodecount_EINVAL.c
+
+test_yaffs_link.c
+test_yaffs_link_EEXIST.c
+test_yaffs_link_ELOOP_dir.c
+test_yaffs_link_ENOENT2.c
+test_yaffs_link_ENOENT3.c
+test_yaffs_link_ENOENT4.c
+test_yaffs_link_ENOENT.c
+test_yaffs_link_ENOTDIR2.c
+test_yaffs_link_ENOTDIR.c
+test_yaffs_link_EROFS.c
+
+test_yaffs_lseek_big_file.c
+test_yaffs_lseek.c
+test_yaffs_lseek_EBADF.c
+test_yaffs_lseek_EINVAL.c
+test_yaffs_lseek_EROFS.c
+
+test_yaffs_lstat.c
+test_yaffs_lstat_ENOENT.c
+test_yaffs_lstat_ENOTDIR.c
+
+test_yaffs_mkdir.c
+test_yaffs_mkdir_EEXIST.c
+test_yaffs_mkdir_ELOOP_dir.c
+test_yaffs_mkdir_ENOENT.c
+test_yaffs_mkdir_ENOTDIR.c
+test_yaffs_mkdir_EROFS.c
+
+test_yaffs_mount2.c
+test_yaffs_mount2_ENODEV.c
+test_yaffs_mount.c
+test_yaffs_mount_EBUSY.c
+test_yaffs_mount_ENAMETOOLONG.c
+test_yaffs_mount_ENODEV.c
+
+test_yaffs_open.c
+test_yaffs_open_EEXIST.c
+test_yaffs_open_EINVAL2.c
+test_yaffs_open_EINVAL.c
+test_yaffs_open_EISDIR.c
+test_yaffs_open_ELOOP.c
+test_yaffs_open_ELOOP_dir.c
+test_yaffs_open_ENAMETOOLONG.c
+test_yaffs_open_ENOENT.c
+test_yaffs_open_ENOTDIR.c
+test_yaffs_open_EROFS.c
+
+test_yaffs_read.c
+test_yaffs_read_EBADF.c
+test_yaffs_read_EINVAL.c
+
+test_yaffs_remount_EINVAL.c
+test_yaffs_remount_ENODEV.c
+test_yaffs_remount_force_off_read_only_off.c
+test_yaffs_remount_force_off_read_only_on.c
+test_yaffs_remount_force_on_read_only_off.c
+test_yaffs_remount_force_on_read_only_on.c
+
+test_yaffs_rename.c
+test_yaffs_rename_dir.c
+test_yaffs_rename_dir_ENOENT2.c
+test_yaffs_rename_dir_ENOENT.c
+test_yaffs_rename_dir_not_empty.c
+test_yaffs_rename_dir_to_file.c
+test_yaffs_rename_EEXISTS.c
+test_yaffs_rename_EINVAL.c
+test_yaffs_rename_ELOOP_dir.c
+test_yaffs_rename_ENOENT.c
+test_yaffs_rename_ENOTDIR.c
+test_yaffs_rename_EROFS.c
+test_yaffs_rename_file_to_dir.c
+
+test_yaffs_rmdir.c
+test_yaffs_rmdir_EBUSY.c
+test_yaffs_rmdir_EINVAL.c
+test_yaffs_rmdir_ELOOP_dir.c
+test_yaffs_rmdir_ENOENT.c
+test_yaffs_rmdir_ENOTDIR.c
+test_yaffs_rmdir_EROFS.c
+
+test_yaffs_stat.c
+test_yaffs_stat_ELOOP.c
+test_yaffs_stat_ELOOP_dir.c
+test_yaffs_stat_ENOENT2.c
+test_yaffs_stat_ENOENT.c
+test_yaffs_stat_ENOTDIR.c
+
+test_yaffs_symlink.c
+test_yaffs_symlink_EEXIST.c
+test_yaffs_symlink_ELOOP_dir.c
+test_yaffs_symlink_ENOENT2.c
+test_yaffs_symlink_ENOENT.c
+test_yaffs_symlink_ENOTDIR.c
+test_yaffs_symlink_EROFS.c
+
+test_yaffs_sync.c
+test_yaffs_sync_ENODEV.c
+test_yaffs_sync_EROFS.c
+
+test_yaffs_totalspace.c
+test_yaffs_totalspace_EINVAL.c
+
+test_yaffs_truncate_big_file.c
+test_yaffs_truncate.c
+test_yaffs_truncate_EINVAL.c
+test_yaffs_truncate_EISDIR.c
+test_yaffs_truncate_ELOOP.c
+test_yaffs_truncate_ELOOP_dir.c
+test_yaffs_truncate_ENOENT2.c
+test_yaffs_truncate_ENOENT.c
+test_yaffs_truncate_ENOTDIR.c
+test_yaffs_truncate_EROFS.c
+
+test_yaffs_unlink.c
+test_yaffs_unlink_EISDIR.c
+test_yaffs_unlink_ELOOP_dir.c
+test_yaffs_unlink_ENAMETOOLONG.c
+test_yaffs_unlink_ENOENT2.c
+test_yaffs_unlink_ENOENT.c
+test_yaffs_unlink_ENOTDIR.c
+test_yaffs_unlink_EROFS.c
+
+test_yaffs_unmount2.c
+test_yaffs_unmount2_EINVAL.c
+test_yaffs_unmount2_ENODEV.c
+test_yaffs_unmount2_with_handle_open_and_forced_mode_off.c
+test_yaffs_unmount2_with_handle_open_and_forced_mode_on.c
+test_yaffs_unmount.c
+test_yaffs_unmount_EBUSY.c
+test_yaffs_unmount_ENAMETOOLONG.c
+test_yaffs_unmount_ENODEV.c
+
+test_yaffs_write_big_file.c
+test_yaffs_write.c
+test_yaffs_write_EBADF.c
+test_yaffs_write_EROFS.c
+
+
+
+Tests to add
+
+       test_yaffs_chmod_ENAMETOOLONG
+
+       test_yaffs_lstat_ENAMETOOLONG
+
+
+       test_yaffs_readlink
+       test_yaffs_readlink_ENOENT
+       test_yaffs_readlink_ENOTDIR
+       test_yaffs_readlink_ELOOP
+       test_yaffs_readlink_ENAMETOOLONG
+
+       
+
+       test_yaffs_mkdir_ENAMETOOLONG
+
+
+
+
+       test_yaffs_symlink_ENAMETOOLONG
+
+
+       test_yaffs_mount2_ENAMETOOLONG
+       test_yaffs_mount2_with read only set
+
+       test_yaffs_unmount2_ENAMETOOLONG
+
+       test_yaffs_remount_force_off_read_only_on
+       test_yaffs_remount_force_on_read_only_on
+
+       test_yaffs_freespace_ENAMETOOLONG
+       test_yaffs_totalspace_ENAMETOOLONG
+       test_yaffs_inodecount_ENAMETOOLONG
+
+       test_yaffs_opendir
+
+       test_yaffs_readdir
+
+       test_yaffs_rewinddir
+
+       test_yaffs_closedir
+
+
+
+       test_yaffs_link_ENAMETOOLONG
+       test_yaffs_link_EPERM
+
+
+
+
+       test_yaffs_rmdir_ENOTEMPTY
+
+
+
+
+
+
+       test_yaffs_rename_EMLINK
+       test_yaffs_rename_EEXISTS or EPERM
+
+
+       test_yaffs_dup
+       test_yaffs_dup_EBADF            
+
+
+       test_yaffs_fchmod_ELOOP
+
+
+
+       test_yaffs_open_ENOSPC
+       test_yaffs_open_ELOOP   
+       test yaffs_open_running_out_of_handles error
+
+       
+       
+
+
+       test_yaffs_stat_ENAMETOOLONG
+
+       test_yaffs_read_big_file
+       test what happens if you read off the end of the file?
+
+       test_yaffs_pread
+       test_yaffs_pread_EBADF
+       test_yaffs_pread_EINVAL
+       test_yaffs_pread_big_file
+
+       test_yaffs_write_big_file
+       test_yaffs_write_EINVAL
+       What happens when you run out of space?
+       
+       test_yaffs_write_EBADF
+       test_yaffs_write
+       test_yaffs_pwrite_big_file
+       test_yaffs_pwrite_EINVAL
+
+
+
+       test_yaffs_unlink_ENOMEM
+
+
+       test_yaffs_stat_ELOOP
+
+
+       test_yaffs_access_ENAMETOOLONG
+       test_yaffs_access_ENOENT_generated_with_a_dangling_symbloic_link
+
+
+
+
+
+       test_yaffs_truncate_ENAMETOOLONG
+       Add a truncate function for truncating a file size to -1.
+
+       What happens if a handle is opened to a file and the file is then deleted?
+       Check to see if yaffs generates an error code for no reason.
+       What happens when a file is opened with no modes set?
+
+       What happens when yaffs is unmounted twice?
+
+       What happens when open a handle, unmount yaffs and then try to use the handle? 
+
+       What happens when a mount point is mounted using mount2 with read only mode set and then a file is chmoded? 
+
+       Try to remove lost and found dir and replace it with a file of the same name.
+
+       Change the mode of the lost and found dir to read only.
+
+Tests which do not exist in yaffs:
+       test_yaffs_close        //This function has already been called by the time this test is reached, 
+                               //so there is no point in testing it.
+
+       test_yaffs_link_EMLINK          //should not happen on yaffs
+       test_yaffs_link_ELOOP
+       
+       test_yaffs_lstat_ELOOP
+
+       test_yaffs_mkdir_ELOOP
+
+       //the yaffs_mknod function does not exist in yaffsfs, so these tests will not be added.
+       test_yaffs_mknod_EACCES
+       test_yaffs_mknod_EEXIST
+       test_yaffs_mknod_EINVAL
+       test_yaffs_mknod_ELOOP
+       test_yaffs_mknod_ENAMETOOLONG
+       test_yaffs_mknod_ENOENT
+       test_yaffs_mknod_ENOTDIR
+       test_yaffs_mknod_EROFS
+
+       teat_yaffs_mount_ELOOP
+
+       test_yaffs_mount2_EINVAL        //cannot happen in yaffs since the mode is not checked.
+       test_yaffs_mount2_ENOTDIR       //cannot be generated in yaffs.
+       test_yaffs_mount2_ENOENT        //cannot be generated in yaffs.
+       test_yaffs_mount2_ELOOP
+
+       test_yaffs_remount_ENOENT       //cannot be generated in yaffs
+       test_yaffs_remount_ENOTDIR      //cannot be generated in yaffs
+
+       test_yaffs_unmount2_ENOENT      //cannot be generated in yaffs.
+       test_yaffs_unmount2_ENOTDIR     //cannot be generated in yaffs.
 
 How to add a test
        First create the test .c and .h file.
 
 How to add a test
        First create the test .c and .h file.
@@ -12,47 +367,48 @@ How to add a test
        Test_yaffs_[function of yaffs which is been tested]_[error trying to be generated]
        
        The .c file needs to contain two functions.
        Test_yaffs_[function of yaffs which is been tested]_[error trying to be generated]
        
        The .c file needs to contain two functions.
-       The first function needs to contain the code for the main test and will return -1 on a failure and 0 or greater on a success.
-       The second function needs contain the code for cleaning up after the test. Cleaning up may include closing some open handles, recreating a file, ect. 
+       The first function needs to contain the code for the main test and will 
+       return -1 on a failure and 0 or greater on a success.
+       The second function needs contain the code for cleaning up after the test. 
+       Cleaning up may include closing some open handles, recreating a file, ect. 
        This second function needs to return -1 on a failure and 0 or greater on success.
 
        This second function needs to return -1 on a failure and 0 or greater on success.
 
-       The name of first function needs to be called the same as the file name (without the .c or .h)
-       The second function's name needs be the same as the first function but with "_clean" added on the end.
+       The name of first function needs to be called the same as the file 
+       name (without the .c or .h)
+       The second function's name needs be the same as the first function but 
+       with "_clean" added on the end.
        
        
-       So if a test is been created for the yaffs function yaffs_fish() then create these files
-       Test_yaffs_fish.c
-               Contains int test_yaffs_fish(void); int test_yaffs_fish_clean(void);
-       Test_yaffs_fish.h
+       So if a test is been created for the yaffs function yaffs_foo() then 
+       create these files
+       test_yaffs_foo.c
+               Contains int test_yaffs_foo(void); int test_yaffs_foo_clean(void);
+       test_yaffs_foo.h
                Which includes "lib.h", "yaffsfs.h" header files.
 
        Next write the test code in these files then add these files to the Makefile.
 
                Which includes "lib.h", "yaffsfs.h" header files.
 
        Next write the test code in these files then add these files to the Makefile.
 
-       Add the name of the test files' object file (test_yaffs_fish.o ) to the TESTFILES tag around line 50 of the Makefile.   
-
-
+       Add the name of the test files' object file (test_yaffs_foo.o ) to the 
+       TESTFILES tag around line 50 of the Makefile.   
 
        Now add the test functions to the test_list[] array in quick_tests.h
 
        Now add the test functions to the test_list[] array in quick_tests.h
-       The order of the tests matters. The idea is to test each yaffs_function individualy and only using tested yaffs_components before using this new yaffs_function. 
-       This array consists of: {[test function], [the clean function], [name of the tests which will be printed when the test fails]}, 
+       The order of the tests matters. The idea is to test each yaffs_function 
+       individualy and only using tested yaffs_components before using this new 
+       yaffs_function. 
+       This array consists of: 
+       {[test function], [the clean function], [name of the tests which will be printed when the test fails]}, 
        
        
-       So add this line to the test_list[]: {test_yaffs_fish, test_yaffs_fish_clean, "test_yaffs_fish"},
+       So add this line to the test_list[]: {test_yaffs_foo, test_yaffs_foo_clean, "test_yaffs_foo"},
 
 
-       Also include the test's .h file in the quick_test.h file: #include "test_yaffs_fish.h"
-
-       The test file should now make and run. 
-       
-       
+       Also include the test's .h file in the quick_test.h file: #include "test_yaffs_foo.h"
        
        
+       The test file should now make and run(you may need to make clean first). 
 
 
 
 
 
 
-       PS: yaffs_fish() is a made up function for this README (in case you want to try and find this function in yaffs). 
+       PS: yaffs_foo() is a made up function for this README (in case you want 
+       to find this function in yaffs). 
 
 
 
 
-BUGS
-       Needing to include int random_seed; and int simulate_power_failure = 0; in any main program using yaffsfs.h
-       ENOSPC error in programs test_yaffs_open_ENOTDIR and test_yaffs_open_ENOENT.
-       ENOENT been returned by yaffs_read but the handle is good and the yaffs_open function does not return an error.