+
+ } else {
+ /* T(("No level 0 found for %d\n", chunk)); */
+ }
+ }
+
+ return failed ? YAFFS_FAIL : YAFFS_OK;
+}
+
+#endif
+
+static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+ int chunkInNAND, int inScan)
+{
+ /* NB inScan is zero unless scanning.
+ * For forward scanning, inScan is > 0;
+ * for backward scanning inScan is < 0
+ */
+
+ yaffs_Tnode *tn;
+ yaffs_Device *dev = in->myDev;
+ int existingChunk;
+ yaffs_ExtendedTags existingTags;
+ yaffs_ExtendedTags newTags;
+ unsigned existingSerial, newSerial;
+
+ if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+ /* Just ignore an attempt at putting a chunk into a non-file during scanning
+ * If it is not during Scanning then something went wrong!
+ */
+ if (!inScan) {
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("yaffs tragedy:attempt to put data chunk into a non-file"
+ TENDSTR)));
+ YBUG();
+ }
+
+ yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+ return YAFFS_OK;
+ }
+
+ tn = yaffs_AddOrFindLevel0Tnode(dev,
+ &in->variant.fileVariant,
+ chunkInInode,
+ NULL);
+ if (!tn) {
+ return YAFFS_FAIL;
+ }
+
+ existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
+
+ if (inScan != 0) {
+ /* If we're scanning then we need to test for duplicates
+ * NB This does not need to be efficient since it should only ever
+ * happen when the power fails during a write, then only one
+ * chunk should ever be affected.
+ *
+ * Correction for YAFFS2: This could happen quite a lot and we need to think about efficiency! TODO
+ * Update: For backward scanning we don't need to re-read tags so this is quite cheap.
+ */
+
+ if (existingChunk > 0) {
+ /* NB Right now existing chunk will not be real chunkId if the device >= 32MB
+ * thus we have to do a FindChunkInFile to get the real chunk id.
+ *
+ * We have a duplicate now we need to decide which one to use:
+ *
+ * Backwards scanning YAFFS2: The old one is what we use, dump the new one.
+ * Forward scanning YAFFS2: The new one is what we use, dump the old one.
+ * YAFFS1: Get both sets of tags and compare serial numbers.
+ */
+
+ if (inScan > 0) {
+ /* Only do this for forward scanning */
+ yaffs_ReadChunkWithTagsFromNAND(dev,
+ chunkInNAND,
+ NULL, &newTags);
+
+ /* Do a proper find */
+ existingChunk =
+ yaffs_FindChunkInFile(in, chunkInInode,
+ &existingTags);
+ }
+
+ if (existingChunk <= 0) {
+ /*Hoosterman - how did this happen? */
+
+ T(YAFFS_TRACE_ERROR,
+ (TSTR
+ ("yaffs tragedy: existing chunk < 0 in scan"
+ TENDSTR)));
+
+ }
+
+ /* NB The deleted flags should be false, otherwise the chunks will
+ * not be loaded during a scan
+ */
+
+ if(inScan > 0) {
+ newSerial = newTags.serialNumber;
+ existingSerial = existingTags.serialNumber;
+ }
+
+ if ((inScan > 0) &&
+ (in->myDev->isYaffs2 ||
+ existingChunk <= 0 ||
+ ((existingSerial + 1) & 3) == newSerial)) {
+ /* Forward scanning.
+ * Use new
+ * Delete the old one and drop through to update the tnode
+ */
+ yaffs_DeleteChunk(dev, existingChunk, 1,
+ __LINE__);
+ } else {
+ /* Backward scanning or we want to use the existing one
+ * Use existing.
+ * Delete the new one and return early so that the tnode isn't changed
+ */
+ yaffs_DeleteChunk(dev, chunkInNAND, 1,
+ __LINE__);
+ return YAFFS_OK;
+ }
+ }
+
+ }
+
+ if (existingChunk == 0) {
+ in->nDataChunks++;
+ }
+
+ yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND);
+
+ return YAFFS_OK;
+}
+
+static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode,
+ __u8 * buffer)
+{
+ int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL);
+
+ if (chunkInNAND >= 0) {
+ return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND,
+ buffer,NULL);
+ } else {
+ T(YAFFS_TRACE_NANDACCESS,
+ (TSTR("Chunk %d not found zero instead" TENDSTR),
+ chunkInNAND));
+ /* get sane (zero) data if you read a hole */
+ memset(buffer, 0, in->myDev->nDataBytesPerChunk);
+ return 0;
+ }
+
+}
+
+void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn)
+{
+ int block;
+ int page;
+ yaffs_ExtendedTags tags;
+ yaffs_BlockInfo *bi;
+
+ if (chunkId <= 0)
+ return;
+
+
+ dev->nDeletions++;
+ block = chunkId / dev->nChunksPerBlock;
+ page = chunkId % dev->nChunksPerBlock;
+
+
+ if(!yaffs_CheckChunkBit(dev,block,page))
+ T(YAFFS_TRACE_VERIFY,
+ (TSTR("Deleting invalid chunk %d"TENDSTR),
+ chunkId));
+
+ bi = yaffs_GetBlockInfo(dev, block);
+
+ T(YAFFS_TRACE_DELETION,
+ (TSTR("line %d delete of chunk %d" TENDSTR), lyn, chunkId));
+
+ if (markNAND &&
+ bi->blockState != YAFFS_BLOCK_STATE_COLLECTING && !dev->isYaffs2) {
+
+ yaffs_InitialiseTags(&tags);
+
+ tags.chunkDeleted = 1;
+
+ yaffs_WriteChunkWithTagsToNAND(dev, chunkId, NULL, &tags);
+ yaffs_HandleUpdateChunk(dev, chunkId, &tags);
+ } else {
+ dev->nUnmarkedDeletions++;
+ }
+
+ /* Pull out of the management area.
+ * If the whole block became dirty, this will kick off an erasure.
+ */
+ if (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING ||
+ bi->blockState == YAFFS_BLOCK_STATE_FULL ||
+ bi->blockState == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) {
+ dev->nFreeChunks++;
+
+ yaffs_ClearChunkBit(dev, block, page);
+
+ bi->pagesInUse--;
+
+ if (bi->pagesInUse == 0 &&
+ !bi->hasShrinkHeader &&
+ bi->blockState != YAFFS_BLOCK_STATE_ALLOCATING &&
+ bi->blockState != YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ yaffs_BlockBecameDirty(dev, block);
+ }
+
+ } else {
+ /* T(("Bad news deleting chunk %d\n",chunkId)); */
+ }
+
+}
+
+static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode,
+ const __u8 * buffer, int nBytes,
+ int useReserve)
+{
+ /* Find old chunk Need to do this to get serial number
+ * Write new one and patch into tree.
+ * Invalidate old tags.
+ */
+
+ int prevChunkId;
+ yaffs_ExtendedTags prevTags;
+
+ int newChunkId;
+ yaffs_ExtendedTags newTags;
+
+ yaffs_Device *dev = in->myDev;
+
+ yaffs_CheckGarbageCollection(dev);
+
+ /* Get the previous chunk at this location in the file if it exists */
+ prevChunkId = yaffs_FindChunkInFile(in, chunkInInode, &prevTags);
+
+ /* Set up new tags */
+ yaffs_InitialiseTags(&newTags);
+
+ newTags.chunkId = chunkInInode;
+ newTags.objectId = in->objectId;
+ newTags.serialNumber =
+ (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1;
+ newTags.byteCount = nBytes;
+
+ if(nBytes < 1 || nBytes > dev->totalBytesPerChunk){
+ T(YAFFS_TRACE_ERROR,
+ (TSTR("Writing %d bytes to chunk!!!!!!!!!" TENDSTR), nBytes));
+ YBUG();
+ }
+
+
+
+ newChunkId =
+ yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+ useReserve);
+
+ if (newChunkId >= 0) {
+ yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0);
+
+ if (prevChunkId >= 0) {
+ yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__);
+
+ }
+
+ yaffs_CheckFileSanity(in);
+ }
+ return newChunkId;
+
+}
+
+/* UpdateObjectHeader updates the header on NAND for an object.
+ * If name is not NULL, then that new name is used.
+ */
+int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force,
+ int isShrink, int shadows)
+{
+
+ yaffs_BlockInfo *bi;
+
+ yaffs_Device *dev = in->myDev;
+
+ int prevChunkId;
+ int retVal = 0;
+ int result = 0;
+
+ int newChunkId;
+ yaffs_ExtendedTags newTags;
+ yaffs_ExtendedTags oldTags;
+
+ __u8 *buffer = NULL;
+ YCHAR oldName[YAFFS_MAX_NAME_LENGTH + 1];
+
+ yaffs_ObjectHeader *oh = NULL;
+
+ yaffs_strcpy(oldName,_Y("silly old name"));
+
+
+ if (!in->fake ||
+ in == dev->rootDir || /* The rootDir should also be saved */
+ force) {
+
+ yaffs_CheckGarbageCollection(dev);
+ yaffs_CheckObjectDetailsLoaded(in);
+
+ buffer = yaffs_GetTempBuffer(in->myDev, __LINE__);
+ oh = (yaffs_ObjectHeader *) buffer;
+
+ prevChunkId = in->hdrChunk;
+
+ if (prevChunkId > 0) {
+ result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId,
+ buffer, &oldTags);